XQL - 3015AF Full Protective Cutting Machine
This fiber laser cutting machine has a fully enclosed protective cover with an exchange table.
1.It can cut sheet metal by Air compressor.
2.Lifespan is 100,000 hours.
3.Laser source 2years warranty.
4.Easy control system.
1.Higher electro-optical conversion rate: fiber cutting machine’s electro-optical conversion rate about 30%, it is 3 times higher than co2 fiber cutting machine.
2.Higher cutting speed and efficient, 2 time faster than YAG or CO2 laser.
3.Low cost: Machine power consumption is 20% -30% of same power co2 laser cutting machine , every hour consumed 0.5w to 1.5 w electricity,it is very easy to maintain: no need to adjust optical path.
| Model | 3015 | Servo Motor | Jaskawa / Schneider (option) | Power supply | 380V/ 50HZ |
| Working size | 3000X1500mm | Control System | Cypcut 2000 | Positioning Accuracy | <0.1mm/m |
| Power | 1000W-12000W | Reducer | Motovrio | The Best Running Speed | 45-60 m/min |
| Laser generator | RAYCUS / IPG | Gear Rack | Taiwan | The Max Running Speed | 90 m/min |
| Cutting Head | OSIPRI / Raytools / WSX (option) | Guide Rail | Taiwan | Accelerated Speed | 0.8 G |
| maximum cutting thickness of 1500 watt |
6 mm stainless steel by nitrogen cutting 16 mm carbon steel by oxygen cuttin 4mm aluminum by nitrogen cutting / high pressure air 4 mm brass by nitrogen cutting / high pressure air |
| maximum cutting thickness of 2000 watt |
10 mm stainless steel by nitrogen cutting 20 mm carbon steel by oxygen cutting 4mm aluminum by nitrogen cutting / high pressure air 5mm brass by nitrogen cutting / high pressure air |
| maximum cutting thickness of 3300 watt |
12 mm stainless steel by nitrogen cutting 22 mm carbon steel by oxygen cutting 8 mm aluminum by nitrogen cutting / high pressure air 6 mm brass by nitrogen cutting / high pressure air |
 |
Raycus Laser Generator 100000 hours service life High Electro-optical conversion efficiency Altitude stress-resiting capacity The best quality and the best stable laser generator in china. HIgh brightness, High conversion rates, hIgh work efficiency |
 |
CNC system: FSCUT 2000 very stable software |
 |
Transmission System: Double Driver Transmission Guide rail ( Taiwan ) Super high precision. hardness, long life, tolerance less than 0.02mm/min) At the beginning of the design, we select 5-10 times normal load guide rail, which it can adapt to more stringent use of the environment and more long-term life. Gear Rack ( Taiwan ) make sure machine accuracy/use life more longer |
 |
Japan Yaskawa Servo Motor / Driver / France Motovrio PO Flange Output Adopts Imported from Japan Yaskawa servo system, the world's top servo motor, with high precision large torque, stable performance, long life
|
 |
Osipri auto focus cutting head can switch cutting freely between different thick material based on software memory, save more time on manual adjust focus. |
 |
Independent hight controler
It can adjust the height of laser head automatically when material ups and downs
|
 |
air conditioning cooling * Protect servo motor components / laser generator in constant temperature * Better cooling system * machine can work 24 hours a day |
 |
Rack and Pinon Imported grinding gear rack, hardness is 2-4 times, service life is 5 times than milling gear rack |
 |
Double Temperature Dual Control Water Tank (3P) Water tank material uses SUS304, it makes water clear and rust proof. Built-in water purifier, easy to dismount, anti-collision, effectively purify impurities in water. |
 |
Exchange table: Save Lifting material time interchanging time is only 15 seconds |
 |
Good convulsions system |
 |
automatic door |
|
|
Wireless Operating Handle very stable and very heavy machine bed |
 |
The driver, Independent hight controler, air conditioning will install in the behind of the machine |
 |
Strong and Stable Machine Bed |
