XQL - 300W YAG Laser Welding Machine
Water chiller, power case, laser beam, marble table.
It is mainly used for making metal letters, it is usually used with channel letter bending machine and fiber laser cutting machine. We also have 300W or 500W hand held welding optional.
1. Suitable materials: stainless steel, steel plate, iron plate, galvanized sheet.
2. It can weld small and complex letters, it also can weld big letters max 2meters.
3. It is easy to operate and fast to weld letters.
4. No black point on the surface of letters.
5. No noise and no pollution.
1. Marble table is smooth, heavy and stable, which is difficult to scratch letter surface.
2. Light path is dust proof to protect lens.
3. The specification of crystal bar is 7*145mm.
4. 1P water cooling system, it adopts Panasonic compressor. 20L volume, it is 304 s.s water tank.
| Max laser power | 300W |
| Laser wave length | 1064nm |
| Mono pulse Max power | 110J |
| Laser welding depth | 0.1-1.2mm |
| Pulse width | 0.1-20ms |
| Laser welding frequency | 1-45Hz |
| Laser spot size adjusting range | 0.2-4.0mm |
| Whole power consumption | ≤7KW |
| Power need | 220V±10%/50Hz/40A |
| Standard configuration working table | 800*1000mm load200Kg |
| Sight positioning | CCD definition camera |
Crystal bar: 7*145mm(specification)
Ceramic core is imported
30 times high definition CCD digital camera
The annular LED light, illumination is without shadow, brightness is adjustable.
Red light position：thimble, trinity( bearing, brass, white needles)
Easy to adjust positioning.
Four capacitance: big capacity, enduring constant storage
Cross screwdriver 1 piece
Straight screwdriver 1 piece
Hexagonal Socket 5 pieces
Photographic paper 1 piece
Thread seal tape 1 piece
Quoit 4 pieces
Thimble 2 pieces
Pedal switch 1 Piece
1. Protection lens USD 5/PCS
2. Xenon lamp USD 45/PCS( Normally half years change but depend on your using frequency)
3. Thimble USD 4/PCS
4. Foot pressing switch USD 6/PCS
Wooden case: 1.85(L)*0.9(W)*1.35(H)=2.23CBM
Gross weight: 320KG
