XQL - Robot Welding Machine
1. Laser welding can be used in welding stainless steel, aluminum, copper and other metals or alloys.
2. Laser welding is widely used in the IT industry, medical equipment, communications equipment, aerospace, machinery manufacturing, battery manufacturing, elevator manufacturing, craft gifts, household appliances manufacturing, tooling, gears, automobile shipbuilding, watches and clocks, jewelry and other industries.
Industrial robot welding, six-axis linkage operation, very flexible, professional welding of shaped, complex hardware.
● Supporting robot control system with laser power adjustment, precise position control, multi-channel output, input signal.
● The robot adopts AC servo motor drive system and has power-off memory function to ensure high precision and high reliability.
● High-power high-energy fiber laser, maintenance-free, no need to replace laser tubes, purlins and the like.
● Industrial robots are a flexible tool that can be used in many different industrial applications. This robot can work in very demanding environments with minimal maintenance.
● The industrial robot welding machine can work continuously for 24 hours, which can effectively replace the manual production caused by intermittent work.
● Robot welding uses fiber laser generator as the light source, its working state can reach 100,000 hours, and the laser itself has maintenance-free function without loss.
● Low operating cost, convenient management, high efficiency and high degree of integration.
| NO. | NA ME | Number | Original | Manufacturer |
| Standard | ||||
| 1 | Fiber laser generator（1000W） | 1set | China | Raycus |
| 2 | Laser welding head | 1pcs | China | WSX SWING HEAD |
| 3 | Machine tool platformand accessories | 1set | China | XQL |
| 4 | Electrical control | 1set | China | AirTAC |
| 7 | Machine toolaccessories | 1set | China | XQL |
| 8 | Control software | 1set | Swedish | ABB(gobal brand) |
| 9 | Industrial controlcomputer | 1set | Swedish | ABB (gobal brand) |
| 12 | Water chiller | 1set | China | XQL |
| Name | Technical parameters |
| Laser type | Fiber laser generator |
| Laser power | 1000W |
| Laser wavelength | 1070-1080nm |
| Electro-optical conversion efficiency | 25-30% |
| Power adjustment range | 10～100%（0.1-10） |
| Center wavelength | 1080NM |
| Red light indicates output power | 0.5～1MW |
| Beam quality | 〈1.3 |
| Cooling system | Water chiller |
| Electricity demand | 380V 50Hz/60Hz |
Robot performance index
| The project name | Technical parameter |
| Robot brand | ABB |
| Robot | IRB1600-10/1.45 |
| Robot Height | 1294 mm |
| Welding depth | 2 mm |
| Robot weight | 250 KG |
| Number of working shaft | 6 axis |
| Robot hand weight | 20.5 KG |
| Control mode | Industrial grade special purpose computer |
| Programming system (touchscreen) | Handheld remote programming |
| Power demand | 200-600V 50Hz/60Hz |
| Appearance size (length × width × height) | 70X1200X2000MM |
| Loading Weight | 10 KG |
(The above parameters are for reference only)
Wuhan Raycus Fiber Laser Technology Co., Ltd. (referred to as "Ruike Laser") is the first in China and is currently the largest enterprise in China specializing in R&D and large- scale production of high-power fiber lasers and core components. Since its establishment in 2007, it has developed two series of 10-100W pulsed fiber lasers and 50-4000W continuous fiber lasers, and has an annual production capacity of 4,000 pulsed lasers and 500 medium and high power continuous lasers. In 2010, the company passed the ISO9001:2008 quality system certification. Several products were listed as national key new products. In 2010, it passed the EU CE certification. Some products are exported to America, Europe, Japan, South Korea and other Asian countries and regions. Raycus' fiber lasers are more environmentally friendly than traditional laser and non-laser equipment:
● Lower power consumption: Fiber lasers are more than 15 times more efficient than conventional lasers.
● Low cooling requirements: The unique design of fiber lasers makes them have a large cooling requirement.
● Large reduction, low power fiber lasers only need to use air cooling.
● Higher spot quality: single mode light source.
● Lower consumption: There are no consumables like replacing lamps or Bars.
The fiber laser series adopts an optical path to generate a resonant cavity type design in the optical fiber. While ensuring high-power laser output, the volume of the laser is reduced, the beam quality is improved, the light beam is transmitted in the optical fiber, and the optical path is not exposed to the air to avoid contamination of the optical path. And has long-term stability. Therefore, the laser welding machine and the large-face laser cutting machine can be used in a relatively harsh industrial environment and have a long working life.
The fiber laser has extremely high electro-optical conversion efficiency, which is several times that of the same power CO2 laser. Its high electro-optical conversion efficiency makes the corresponding power consumption and the power consumption of the chiller the lowest. It is the most stable and efficient mainstream laser in the world.
The industrial robot system consists of two separate units: Control cabinets and manipulators are further divided into electrical and mechanical systems.
distributed throughout the manipulator, consisting of two main cable systems; power and signal cables. The power cable supplies power to the motor unit of the manipulator shaft. The signal cable provides various signals for various control parameters, such as shaft position, motor revolutions, and so on. The AC motor unit powers the various manipulator shafts through gears. When the robot cannot be operated for more than 3 minutes in automatic and manual operation, mechanical braking, electrical release, and locking of the motor unit occur.
The manipulator has 6 axes and the movement is very flexible. Axis 1 Rotate the manipulator. The shaft 2 reciprocates the lower arm. The lower arm forms a parallelogram with respect to the upper arm together with the parallel arm and the parallel bracket. Parallel brackets are mounted on the bearings of the parallel arms and upper arms. Axis 3 Raise the upper arm of the manipulator. The shaft 4 on the side of the upper arm raises the upper arm. The wrist strap is bolted to the top of the upper arm and includes shafts 5 and 6. These axes form an intersection and the motor is located on the back of the upper arm. Axis 5 is used for tilting and axis 6 is used for rotation.
With the ABB robot-specific control system, the IRC5 M2004 control cabinet contains all the necessary functions for moving and controlling the robot.
The IRC5 controller M2004 can contain a single cabinet or be divided into two separate modules: control module and drive module Piece. In a single cabinet, the control and drive modules are integrated into one module.The control module contains all electronic controls such as the main unit, I/O board and flash memory. All software necessary for robot operation (this is the RobotWare system). The drive module contains all the power supplies that power the robot motor. The IRC5 drive module can contain up to 9 drives, dynamic unit, which can handle 6 external axes with 2 additional axes or additional axes, depending on the model of the robot.When using multiple controllers to run multiple robots (MultiMove option), you must add to each additional robot.
The laser welding head adopts German technology as the special welding head of the fiber laser to ensure the welding precision and efficiency. The lens can withstand 1000 watts of laser power for 24 hours, and the welding head water adopts the whole body water cooling system. The lens is lowered in temperature so that the lens does not produce a thermal effect. The internal structure of the laser head is completely sealed, which can avoid the dust pollution of the optical part. It is equipped with an air knife to prevent the welding slag from flying into the welding head. The laser protection lens is replaced by a drawer type, and the whole replacement process is convenient and fast. The optical path system has the advantages of high efficiency, stability, school illumination, convenient maintenance, etc. The entire optical path system is protected by clean positive air pressure, ensuring that the optical lens and nozzle of the cutting head are free from contamination.
The professional chiller adopts the refrigerant control loop, and the high-precision temperature controller controls and displays the water temperature, which is divided into two temperatures. One way to cool the cooling of the welding head, the operation mode is two degrees lower than the room temperature, and the fiber laser is cooled and cooled all the way. Designed to control the temperature of the laser standard, the laser can operate at a constant temperature and high efficiency to ensure a longer lifetime of the internal components of the laser. Fully automatic operation, high efficiency and low noise; the internal water tank and pipeline of the product are made of stainless steel plate, the external gold plate parts are all electrostatically sprayed, which can effectively prevent rust; the use of clean water or deionized water further improves the efficiency and life of the laser equipment.
| 1 | Voltage:(suggest use voltage stabilizer)(1) Rated output voltage: 380V(2) Frequency: 50Hz(3) Two-phase voltage stability +5%(4) Output voltage adjustment rate: <2% |
| 2 | Working piece: Gap is less than One tenth of the thickness of the material |
| 3 | Auxiliary gas: High purity argon or nitrogen : purity not less than 99.9% to prevent oxidationof processed parts. |
| 4 | Water of water chiller: Need pure water, deionized water or distilled water |
The price of main part
|
Laser generator-Raycus 1000
|
Chinese top laser generator supplier, cooperated with military industry. The fiber laser generator is used as the light source, and its working state can reach 100,000 hours, and the laser itself has maintenance-freefunction without loss. |
 |
Using the world's top Swiss ABB robotic control system, ABB'sin-depth automotive manufacturing expertise provides a full range of robotic production solutions for every component. robot radius 1.45 meters. |
|
WSX Swing welding head
|
The high-power hand-held welding head is curved, small in size and easy to operate. WSX welding head with WSX control system can effectively provide welding efficiency and weldingeffect. |
|
Custom fixture
|
Professional custom fixtures, pneumatic cylinders designed to meet different sizes of weldedobjects. Price: 28000rmb/4060usd |
| Warranty & service | ||
| The whole machine is guaranteed for one year and laser generator for two years | ||
| Price (ex-factory price) | ||
| XQL-WG1000WRobot welding machine |  |
ABB Robot: Ex works : 40,000 USDTable: extra add 1500 USD With fill wire function1.45 meter radius Step Robot: Ex works: 32,800 USD Table: extra add 1500 USD With fill wire function1.8 meter radius |
| ConsumablesReplace it once every 1~2 months |  |
price: 15usd |
Remark
1. One year warranty for whole machine ( not including consumption), two years warranty for the laser generator.
2. Training and installation is free in China, and door-to-door service is available in foreign countries. (*customers need to bear the cost of technical personnel training and installation which is about 150 RMB per day, air tickets, accommodation, meals and so on)
3. T/T 30% for deposit, balance should be paid before shipment.
Customer site-Installation & training
* Inquiry and consulting support.
* Sample testing support.
* View our Factory.
* Engineers available to service machinery overseas.
* 7*24hours online support.
